How to make a car

Introduction

This tutorial will demonstrate the basic steps needed to build a car from scratch. The scripts used to make the car move are derived from the basic plane scripts. In that sense, the car has many of the same key objects as the plane. For this tutorial, the plane scripts have been simplified and customized to make them car-specific. In addition, the type of car described in this tutorial moves by the rotation of the wheels, not by applying Velocity to the engine brick.

Creating a Car From Scratch

These instructions describe the building of the car within GoodBlox Studio.

The car will consist of these models:

CarGarage
Car
Parts
BodyKit

Creating the CarGarage Model

The purpose of CarGarage model is basically to hold the script needed to re-generate the car after a player drives away. Follow these steps to create the CarGarage model and add the necessary objects which will allow the car to regenerate.

In the Explorer window, select the Workspace
From the Insert menu, select Object > Model
Rename this new model CarGarage
Select the new CarGarage model
From the Insert menu, select Object > IntValue. Rename this value Regen
Select the CarGarage model, and insert a Script object. Rename this script RegenScript. Add the following code into the script.


system = script.Parent     -- gets the Garage model
model = system.Car         -- gets the Car model
backup = model:Clone()     -- creates a copy of the Car model
regen = system.Regen       -- Saves the integer value stored in the Garage's Regen variable

function checkRegen()
	if regen.Value == 1 then          -- When the player starts driving the car, the script
					     -- sets this value to 1
		model = backup:Clone()    -- copies the copy of the Car
		model.Parent = system     -- adds the plane to the Garage
		model:MakeJoints()        
	end
end

regen.Changed:connect(checkRegen)         -- When a Car is created, the regen value changes 
                                          -- from nil to a value - triggering this call.

Your Explorer window should look something like this:

File:CarGarage.PNG

Creating the Car Model

The Car Model will hold all parts that are needed to make the car. Follow these steps to create the structure of the Car:

Select the CarGarage Model and insert an object Model. Name this new model Car.
Select the Car model, and insert an object IntValue. Name this value Stunt.
Insert into the Car model two additional models - name them Parts and BodyKit.
The structure of the CarGarage model should now look like this:

File:CarModel.PNG

Creating the Parts Model

This model will hold all the key pieces that will make the car driveable. Follow these steps to add the necessary pieces:

Select the Parts model and insert a CFrameValue object. Name this value OriginCFrame.
Insert into the Parts model a script object. Name this script CarScript.

Select the following code, copy it and paste it into the CarScript script:

position = script.Parent.Engine.Position  -- position of the engine

-- Add CFrame to Engine
local frame = Instance.new("CFrameValue")
frame.Name = "OriginCFrame"
frame.Value = script.Parent.Engine.CFrame
frame.Parent = script.Parent

-- Get the CarGarage
local object = Instance.new("ObjectValue")
object.Value = script.Parent.Parent.Parent

-- Get the Seat
seat = script.Parent.Seat

function onChildAdded(part)
	-- if the user sits in the seat
	if part.className == "Weld" then
		local torso = part.Part1
		if torso ~= nil then
			local parent = torso.Parent
			if parent ~= nil then
				-- assign the CarGarage model to the player
				script.Parent.Parent.Parent = parent
				while true do
					wait(2)
					local pos = script.Parent.Engine.Position
					-- once the car is far enough from original spot - 
					-- set the Regen value - so it causes another car to regenerate
					if (position - pos).magnitude > 30 then
						if object.Value ~= nil then
							object.Value.Regen.Value = 1
							wait(.5)
							object.Value.Regen.Value = 0
							object.Value = nil
						end
					       break 
					end
				end
				while true do
					wait(2)
					if part == nil then
						script.Parent.Parent.Parent = game.Workspace
						script.Parent.Parent:MakeJoints()
					break end
				end
			end
		end
	end
end

-- When a player seats in the car
seat.ChildAdded:connect(onChildAdded)

Insert into the Parts model a Seat object. Note, this seat will be the driver's seat.

Change the Size of the seat to be 2x2 (2 for x axis, and 2 for z axis.)
Change the formFactor of the seat to be Plate.
Change the BrickColor property to any color. In this example, the seat is Black.
Change the FrontSurface property of the Seat to Hinge. This will show which side of the Seat is the front. It is important that the front of the Seat brick is facing the front of the car. The FrontSurface can be changed back to Smooth.
To make sure the TopSurface is facing up, change it to be type Hinge. Make sure the yellow hinge is pointing up.
Change the BottomSurface and TopSurface to Weld.

Insert into the Parts model a Part object. Name it Engine.

Change the Size of the Engine brick to be x=4, y=1.2, z=16. For this example, this brick will make the bottom of the car.
Change the BrickColor property to any color. In this example, the Engine brick is Bright red.
Change the FrontSurface property of the brick to Hinge. This will show which side of the brick is the front. It is important that the front of the Engine brick is facing the front of the car. The FrontSurface can be changed back to Smooth.
Select the Engine brick, and insert into it the IntValue object. Rename the IntValue object to Count.
Insert into the Engine brick a Script object. Copy and paste the following code into the Engine script object:

model = script.Parent.Parent.Parent -- get the garage
backup = model:clone() -- copy it
local debounce = false

function onTouch(part)
	if (part.Name == "Safe") and (debounce == false) and (script.Parent.Count.Value == 0) then
	debounce = true
	wait(2)
	model = backup:clone()
	model.Parent = game.Workspace
	model:makeJoints()
	script.Parent.Count.Value = 1
	debounce = false
	end
end 

-- if Engine brick is touched
script.Parent.Touched:connect(onTouch)

Insert into the Engine brick a BodyGyro object.

Set maxTorque values for x, y and z to 0.

Insert into the Engine brick a BodyPosition object.

Set maxForce values for x, y and z to 0.

Insert into the Engine brick a BodyVelocity object, and name it Drift.

Set maxForce values for x, y and z to 0.
Set velocity values for x, y and z to 0.

Insert into the Parts model an additional 4 Part objects. These bricks will become the wheels of the car. Name the 4 new bricks these names:

LeftWheel1, LeftWheel2, RightWheel1, RightWheel2. For each of these 4 wheel bricks, do the following:

Make the BackSurface, BottomSurface, and TopSurface Smooth
Make the Shape property Cylinder.
Make the size (3,3,3)
Make the formFactor property Symmetric.
Set the BrickColor property to Black

At this point, you should have these pieces in your workspace:

File:Parts2.PNG

Assembling the Parts

Assemble these key pieces of the car as follows:

Place the Seat on the front section of the Engine brick.
Select the 4 wheels, and change the FrontSurface to Hinge. This will show you which is the front of the wheel.
Place the wheels next to each side of the Engine, where wheels go. Make sure the front surface of the wheel is facing to the front of the car.
Make sure the Left wheels are on the left side of the car - On your left if you were sitting on the seat facing forward.
Make sure the Right wheels are on the right side of the car.

The wheels should look like this now:

File:Wheels1.PNG

Select the two left wheels, and change the RightSurface to be Motor.
Select the two right wheels, and change the LeftSurface to be Motor.
Now you need to move the Engine brick up a little, so the middle of the brick will align with the motor hinge of each wheel.
NOTE: Since it can be difficult to move the wheels while they are inside the model, you may drag the wheels to be under the Workspace object in the Explorer window. This will allow you to move them with the move tool, to make sure they are attached properly to the engine brick. Once that is done, drag the wheels to be back under the Parts model.
Make sure the hinges of the wheels (for the FrontSurface) are pointing towards the front of the car.
Move each wheel so that the motor hinge is inside the Engine brick.
Change the FrontSurface to Smooth for each of the 4 wheels.

File:Car1.PNG

Adding the Car Tool

Follow these steps to add the Car Tool to players as they enter the game.

Insert a HopperBin object under the StarterPack and name it Car Tool
Select the Car Tool and insert a script object into it. Name the script CarDriver
Copy the following code into the script.

bin=script.Parent
car=nil
hold=false
local debounce = false
local cardebounce = false
local stuntdebounce = false
local controlling = false

function computeDirection(vec)
	local lenSquared = vec.magnitude * vec.magnitude
	local invSqrt = 1 / math.sqrt(lenSquared)
	return Vector3.new(vec.x * invSqrt, vec.y * invSqrt, vec.z * invSqrt)
end

function move(target, engine)
	local origincframe = engine:findFirstChild("BodyGyro").cframe
	local dir = (target - engine.Position).unit
	local spawnPos = engine.Position

	local pos = spawnPos + (dir * 1)

	engine:findFirstChild("BodyGyro").maxTorque = Vector3.new(9000, 9000, 9000)
	engine:findFirstChild("BodyGyro").cframe = CFrame.new(pos,  pos + dir)
	wait(0.1)
	engine:findFirstChild("BodyGyro").maxTorque = Vector3.new(0, 0, 0)
	engine:findFirstChild("BodyGyro").cframe = origincframe
end

function findCar(player)
	local list = player.Character:GetChildren()
	for x = 1, #list do
		if (list[x].Name == "Car") then
			local weld = list[x]:FindFirstChild("Parts"):FindFirstChild("Seat"):FindFirstChild("SeatWeld")
			if (weld ~= nil) and (weld.Part1 == player.Character:FindFirstChild("Torso")) then
				return list[x]
			end
		end
	end
	return nil
end

function onButton1Down(mouse)
	local vehicle = findCar(script.Parent.Parent.Parent)
	if vehicle ~= nil and debounce == false and cardebounce == false then
	debounce = true

	controlling = true

	while true do
		wait()
		local engine = vehicle.Parts.Engine
		local position = mouse.Hit
		local target = position.p
		if engine ~= nil then
		move(target, engine)
		end
		if cardebounce == true or
		controlling == false then break end
	end
	wait(.1)
	debounce = false
	end
end

function onButton1Up(mouse)
	controlling = false
end

function onSelected(mouse)
	mouse.Icon = "rbxasset://textures\\GunCursor.png"
	mouse.Button1Down:connect(function() onButton1Down(mouse) end)
	mouse.Button1Up:connect(function() onButton1Up(mouse) end)
	mouse.KeyDown:connect(onKeyDown)
end

function onKeyDown(key)
	if (key~=nil) then
		key = key:lower()
		local vehicle = findCar(script.Parent.Parent.Parent)
		if (vehicle==nil) then return end
		car = vehicle.Parts
		local engine = vehicle.Parts.Engine
		local r1 = engine.Parent.RightWheel1
		local r2 = engine.Parent.RightWheel2
		local l1 = engine.Parent.LeftWheel1
		local l2 = engine.Parent.LeftWheel2
		if (key=="x") and cardebounce == false then
			r1.LeftParamB= 0
			r2.LeftParamB= 0
			l1.RightParamB= 0
			l2.RightParamB= 0
		end
		if (key=="y") then
			r1.LeftParamB= -1
			r2.LeftParamB= -1
			l1.RightParamB= 1
			l2.RightParamB= 1
		end
	end
end

bin.Selected:connect(onSelected)

Testing your Car

The car frame is ready to be tested. Save your work and run it in either Test Solo mode, or Start Server and add a player to see if any error messages come up. The Car Tool has these commands:

y will start the car. The car should start moving as soon as y is pressed.
x will stop the car.
Clicking the mouse will make the car turn in the direction of the click.

Debugging Tips

If the car doesn't move, but the mouse click makes it change direction, then you need to review every brick to make sure it is pointing forward (change the FrontSurface to hinge to verify).
Verify the BodyGyro, BodyPosition and BodyVelocity objects in the engine have their values set to 0 - per the instructions.
Verify the name of your model matches the instructions, or that you have changed the scripts accordingly.

Creating the BodyKit Model

Now that the basic frame of the car is working, it can be completed to look as desired. Any additional bricks or parts should be added to the BodyKit model. The seat may be placed anywhere on the car, it does not have to sit on the engine brick. Here are some ideas for making the car look realistic:

Add a floor and sides to the car
Add a windshield using a mesh and a semitransparent brick
Add more seats
Add headlights and brake lights.
Look through the free models for ideas on how to complete your car structure.

As the final shape of the car is developed, test the car by driving it - to ensure a change didn't break it.

File:BodyParts.PNG

How to make a car

Contents

Introduction

Creating a Car From Scratch

Creating the CarGarage Model

Creating the Car Model

Creating the Parts Model

Assembling the Parts

Adding the Car Tool

Testing your Car

Debugging Tips

Creating the BodyKit Model

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

scripting help

Tools